![]() ![]() Restarted it and it told me to access the scanner paper feed sections and clear them out there was nothing there. ![]() reinstalled the print head, then I got a scanner error with a paper jam. On my printer nothing moves it just turns on and shows the error This occurred directly after I removed the print head to unclog 2 colors after a multitude of print head cleanings. No clue how long it will last, but prevents me from having a useless paperweight sitting on my home office shelf! This took me a few tries, but eventually fiddling around with the cartridge housing while it was over on the right edge of the printer freed it enough for it to become “functional” again. This may even allow you to keep using the actual printer, although I haven’t tested! While printer is off, gently slide cartridge housing to the left about halfway.Īfter cartridge housing moves all the way to the right (which it will do on startup), gently push up and back on the housing and continue pressing/gently jiggling as the housing tries to free itself.Įventually, the housing will snap back to the left which will stop tripping the error message, and free you to use the scanner, copy, fax, etc. Open printer such that the cartridge housing is accessible (flip the scanner housing up). However, this little trick appears to have given new life to the Workforce. and you need a page printed, the original technique may be useful.Unfortunately, the above error locks you out of any of the all-in-one features, even ones that don’t involve the actual printer. The best solution is simply to refill your cartridges (see this site for some alternatives). ![]() The other problem is that since the printer has no real idea how much ink is in a cartridge (it guesses based on what you've printed) it sees opening the cartridge carrier as replacing the cartridge and now assumes the cartridge is full. This is Epson's explanation for why it stops printing with ink left. The biggest concern is that you may not notice right away when the cartridge finally does give out, and printing with no ink can damage the expensive-to-fix print head. Update: Tim Rosencrans adds: "There are a couple of consequences to this procedure. ![]() To see if your printer uses microchip-based cartridges, check the ink level if clicking on the picture of the cartridge with the ink level shows the part number, manufacturer and type of cartridge, then the printer uses a chip)." Update: Michael Kincaid writes: "This trick only works on Epson printers that don't use microchips on the cartridges to track the ink level (such as the 777, C60, C80, 1290, and many of the Photo models). I was able to continue printing, and the output still looks good, so I'm getting more bang for my buck with this cartridge."
0 Comments
Leave a Reply. |
AuthorWrite something about yourself. No need to be fancy, just an overview. ArchivesCategories |